The working part of the squeegee is the printing end of the squeegee, which comes into contact with the screen during the printing process. The hardness or softness of the screen printing squeegee is the entire printing process is crucial. The screen printing squeegee determines the printing quality.

The triple layer squeegee has a solid support and the hardness of the printing end of the squeegee can vary. Because the squeegee will bend during printing, that reduced screen pressure, increased contact area with the substrate material surface, and more uniform coating of printing ink on the substrate material surface. Triple scree printing squeegee is an ideal choice for high-speed printing machines, which can print flat glass, solder resist, and make the multi-color printing ink layer and UV light oil layer uniform and consistent. Some printing does not require this triple scree printing squeegee, but with the increasing demand for high-quality printed products from customers, it is necessary to choose the appropriate scraper.

Flat mouth screen printing squeegee is widely used for printing textiles on ordinary materials such as paper. This type of squeegee has moderate adaptability to printing materials and can produce the maximum pressure is generated, and the ink is scraped off the screen instead of flowing through it under pressure, so the excess ink is minimized. Flat mouth squeegee glue is ideal choice for line printing and dot printing. The smaller the ink layer, the finer the printed image.

Sharp mouth screen printing squeegee can effectively control excessive ink flow when printing glass and plastic bottles. Double blunt rubber squeegee can better control the printing angle. The pointed mouth rubber scraper is also suitable for fine printing on textiles.